Everything You Need to Know about High-Speed Stamping

Published by Worthy Hardware at November 29, 2024

What is High-Speed Stamping?

High-speed stamping is a specialized metal-forming technique that uses presses capable of operating at incredible speeds—sometimes up to 1,000 strokes per minute. These presses are equipped with progressive dies that allow for multiple operations, such as cutting, bending, and punching, all in one seamless motion.

Advantages of High-Speed Stamping

So, why should you care about high-speed stamping? Let’s break it down. There are a lot of reasons why this method should be your go-to for metal part production. If you’re aiming for faster turnaround times, reduced costs, and top-notch quality, then high-speed stamping might just be your new best friend. Here’s a quick rundown of the main benefits:

Speed and Efficiency: High-speed presses are capable of up to 1,000 strokes per minute, significantly boosting production capacity. That means you can meet tight deadlines without compromising on quality.
Cost-Effective: Because high-speed stamping maximizes material usage and minimizes waste, it’s an extremely cost-effective solution for large-volume production runs. Plus, the speed of the process means lower labor costs—more parts produced per hour for less.
Precision: When you’re working with intricate parts, precision is non-negotiable. High-speed stamping delivers parts that meet exact specifications every time, which is crucial in industries like aerospace and medical manufacturing.
Consistent Quality: The beauty of automation in high-speed stamping is that you can achieve consistency across thousands of parts. Once the setup is done, you’re looking at identical parts, batch after batch.
Versatility: This process can handle various metals, including steel, aluminum, and brass, allowing manufacturers to create everything from tiny electronic components to heavy-duty automotive parts.
Reduced Lead Times: With its ability to produce high volumes quickly, high-speed stamping dramatically cuts down on production lead times, helping you get to market faster than your competitors.

High-Speed Stamping Processes

The high-speed stamping process is like a well-oiled machine—everything works together seamlessly to produce high volumes of parts with precision and efficiency. But how does it actually work? Let me walk you through the key steps involved in a typical high-speed stamping operation.

1. Design and Tooling Setup

Before the press even starts, everything begins with the design phase. The engineers at Worthy Hardware carefully design the tooling, which includes the die, punch, and other components that will shape the metal. High-speed stamping often involves progressive dies, which are multi-stage tools that allow the part to be progressively shaped through multiple stages in one machine pass. This is where we set up the exact specifications and dimensions for your parts.

Once the design is approved, we manufacture and install the die sets onto the stamping press. This process is crucial because the precision of the tooling determines the quality of the final product.

2. Material Feeding

After the tool setup, the next step is feeding the metal into the press. High-speed stamping uses a coil of metal (often thin sheets) that’s unwound and fed into the press system. The material needs to be perfectly aligned to avoid any distortions or defects. The feeder mechanism in a high-speed press ensures smooth feeding of the material at the correct speed, synchronized with the press operation.

3. Stamping Operation

Once the material is properly aligned, the press activates and begins the stamping process. In a high-speed press, this can happen as quickly as 1,000 times per minute. As the press comes down, the die and punch interact with the material, applying force to cut, bend, and shape the metal into the desired form.

Depending on the design, the part may go through multiple stages of stamping in a single pass. Each pass progressively shapes the part, allowing for high precision and complex geometries to be formed in one go.

4. Part Ejection

Once the part has been fully stamped and shaped, the next step is part ejection. This is done using automated systems, like ejector pins or air jets, which push the finished part out of the die. High-speed stamping presses are designed to handle this quickly and efficiently, ensuring that the next cycle starts as soon as the part is ejected.

Types of High-Speed Stamping Processes

When it comes to high-speed stamping, there are primarily two types of presses used—mechanical and hydraulic. Both have their unique advantages and are suited to different kinds of production needs.

1. Mechanical High-Speed Stamping

Mechanical high-speed stamping relies on a mechanical drive system, typically powered by a flywheel, which stores energy and transfers it to the punch during the stamping cycle. The result? Lightning-fast speeds and exceptional precision.

How it works:
The mechanical press works by applying force through a mechanical drive mechanism. When the press is activated, the flywheel spins and then delivers its stored energy to the punch, which moves down rapidly to shape the metal. This system operates using a fixed, predictable force, making it ideal for high-volume production runs where speed and consistency are critical.

Best for:
Mechanical high-speed stamping is ideal for mass production of small to medium-sized parts, especially in industries like automotive, electronics, and consumer goods, where precision and speed are paramount.

2. Hydraulic High-Speed Stamping

Unlike mechanical presses, which use a flywheel-driven mechanical system, hydraulic presses rely on pressurized fluid to move the punch and die. The force can be finely adjusted, which makes this type of press especially useful for more delicate or complex parts.

How it works:
In a hydraulic press, a hydraulic pump generates pressurized fluid that pushes a piston, driving the punch down onto the material. The advantage here is that the hydraulic system can be adjusted to apply varying amounts of pressure, allowing for greater control over the stamping process. This is particularly useful for stamping parts that require precise, controlled force to avoid damage.

Best for:
Hydraulic high-speed stamping is often used in industries like aerospace, medical devices, and heavy machinery, where parts are larger, more complex, or made from tougher materials. It’s also great for producing parts with deep draws, more intricate shapes, or those requiring a higher level of force control.

Mechanical vs. Hydraulic High-Speed Stamping

Both mechanical and hydraulic high-speed stamping presses have their unique advantages, and the choice between the two depends largely on the specific needs of your production.

If you’re focusing on high-speed, high-volume production of simpler parts where precision is a priority, mechanical high-speed stamping is the way to go. It’s faster, more reliable, and cost-efficient for larger runs.
If you’re working with more complex or delicate parts that require more control over pressure and speed, or larger parts that need higher force, hydraulic high-speed stamping would be your best bet.

Factors to Consider When Choosing High-Speed Stamping

1. Part Complexity and Design

The complexity of your part will significantly influence your choice of stamping press. If you’re producing parts with intricate designs or features (like small holes, fine bends, or deep draws), you might need more precise, adjustable force control. For these types of parts, hydraulic high-speed stamping is often the best option because it provides more flexibility in adjusting pressure and speed. On the other hand, if your parts are simpler and require high-speed, high-volume production, mechanical high-speed stamping could be the ideal solution.

Key Question to Ask:
Are your parts simple and uniform, or do they have complex features that require detailed control?

2. Material Type and Thickness

Different materials respond to stamping forces in various ways. For instance, soft metals like aluminum are easier to stamp at higher speeds, while tougher metals like stainless steel or high-strength alloys might require more control over the force and speed. Additionally, the thickness of the material will determine the amount of force needed during the stamping process. If you’re working with heavy-duty or thick materials, a hydraulic press might be necessary to handle the additional force required. For lighter materials or thinner sheets, mechanical presses are typically more than sufficient.

Key Question to Ask:
What type of material will you be stamping, and how thick is it?

3. Production Volume and Speed

High-speed stamping is designed for high-volume production, but not all production runs are the same. If you’re looking at producing thousands or even millions of parts, mechanical high-speed stamping is generally the more efficient option due to its rapid cycle times and consistent output. However, if your production run is smaller or requires more customization (like short-run prototypes or parts with varying specifications), hydraulic stamping might offer the flexibility needed to adjust for these changes without retooling too much.

Key Question to Ask:
What’s your expected production volume, and how quickly do you need the parts?

4. Tooling and Maintenance Costs

Tooling and maintenance are ongoing costs that should be factored into your decision. Mechanical presses tend to have simpler tooling, which makes them less expensive to maintain over the long term. However, if your production requires frequent tooling changes or a variety of part shapes, hydraulic stamping presses can offer more flexibility without needing constant retooling. Keep in mind that while hydraulic presses might have higher upfront tooling costs, they often have the advantage when it comes to versatility in terms of part complexity and material types.

Key Question to Ask:
What’s your budget for tooling, and how often will you need to make tooling changes?

5. Precision and Tolerances

Finally, the level of precision required for your parts should influence your press choice. If your parts need to meet tight tolerances, mechanical high-speed stamping is often the better option because the mechanical press provides consistent and repeatable force. For parts that don’t require ultra-tight tolerances but need flexibility in shaping (such as softer materials or deeper draws), hydraulic stamping might provide the right balance of flexibility and precision.

Key Question to Ask:
How precise do your parts need to be, and what tolerance levels are acceptable?

Conclusion

High-speed stamping offers incredible efficiency and precision, but choosing the right process depends on your unique production needs. At Worthy Hardware, we specialize in both mechanical and hydraulic stamping and can help you find the perfect solution for your business. Contact us today to discuss how we can support your manufacturing goals!

FAQ

What types of materials can be stamped?
High-speed stamping works with a variety of materials, including aluminum, steel, brass, and other metals. The choice of material will impact the stamping process and tooling.

How fast is high-speed stamping?
High-speed presses can achieve up to 1,000 strokes per minute, depending on the complexity of the part, which allows for rapid production of high-volume orders.